SL Fasteners Pvt. Ltd. also give solutions of Rivet mate Blind rivets, These are 2-piece fasteners where access of both sides is required. General terms say rivet body and a rivet body cap. The semi-tubular rivet body is inserted from one side and the blind Rivet is inserted from the other. When set, the Rivet expands inside the semi-tubular rivet and clamps tightly and securely without crushing the parent material
Rivet mates are available in 4.8 mm (3/16”) dia and 6.4mm (1/4”) dia for a wide grip range of 15.8 mm to 98.4mm (5/8” to 3-7/8”)
Rivet Mate Blind Rivets
Rivet Mate Blind Rivets
Rivet Mate Blind Rivets
Rivet Mate Blind Rivets
Material
- Rivet Body – Aluminium, Mandrel – Aluminium
- Rivet Body – Aluminium, Mandrel – Steel
- Rivet Body – Steel, Mandrel – Steel
Key Features
- Extra-Wide grip range 15.8mm to 98.4mm (5/8″ to 3-7/8″)
- Large bearing area against both sides of the application spreads the tail bearing load/clamp load on the rear sheet to prevent damage
- Clamps tightly and securely without crushing parent material
- Excellent hole fill via radially expanded rivet body for a strong and vibration resistance joint
- Rivet stem retained in tubular component avoids loose stems
- Low profile head form on both sides of the application for a neat appearance
| Rivet-Mate | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nom Rivet Size | Rivet Code | Hole Dia | Domed Head Dia | Head Height | Mandrel Dia | Mandrel Protrusion | Domed Head Grip Range | Tensile | |||||||
| Size | D₁ (Max.) | D₂ (Max.) | L₁ (Max.) | L₂ (Max.) | Min.~ Max. | H₁ (Min.~ Max.) | H₂ (Min.~ Max.) | E₁ (Max.) | E₂ (Max.) | W (Nom) | P (Min.) | Min.~ Max. | Material | LBS Min. | |
| 3/16″ ( 4.8 ) | 3.2 | 4.8 | 13.4 | 15.0 | 6-1 | 6.4 ~ 5.0 | 9.0 ~ 10.0 | 9.0 ~ 10.0 | 1.5 | 1.5 | 2.0 | 27.0 | 16.0 ~ 19.0 | Steel | N/A |
| 16.5 | 6-2 | 17.5 ~ 22.3 | |||||||||||||
| 21.0 | 6-3 | 22.3 ~ 27.0 | Steel | ||||||||||||
| 25.8 | 6-4 | 27.0 ~ 31.8 | |||||||||||||
| 30.5 | 6-5 | 31.8 ~ 36.5 | Aluminium | N/A | |||||||||||
| 35.2 | 6-6 | 36.5 ~ 41.3 | Steel | ||||||||||||
| 40.0 | 6-7 | 41.3 ~ 46.0 | Aluminium | N/A | |||||||||||
| 44.8 | 6-8 | 46.0 ~ 50.8 | |||||||||||||
| 49.6 | 6-9 | 50.8 ~ 55.6 | Aluminium | ||||||||||||
| 54.3 | 6-10 | 55.6 ~ 60.4 | |||||||||||||
| 1/4″ ( 6.4 ) | 4.8 | 6.4 | 11.3 | 15.0 | 7-1 | 7.9 ~ 8.0 | 15.3 ~ 16.0 | 15.3 ~ 16.0 | 2.4 | 2.4 | 3.0 | 31.7 | 16.0 ~ 19.0 | Steel | 348 |
| 11.3 | 17.7 | 7-2 | 19.0 ~ 22.5 | ||||||||||||
| 15.5 | 20.8 | 7-3 | 22.5 ~ 28.5 | Steel | |||||||||||
| 27.2 | 7-4 | 28.5 ~ 35.0 | |||||||||||||
| 33.6 | 7-5 | 35.0 ~ 41.5 | |||||||||||||
| 40.0 | 7-6 | 41.5 ~ 47.8 | Aluminium | 450 | |||||||||||
| 46.3 | 7-7 | 47.8 ~ 54.0 | |||||||||||||
| 52.6 | 7-8 | 54.0 ~ 60.5 | Steel | ||||||||||||
| 59.0 | 7-9 | 60.5 ~ 66.8 | |||||||||||||
| 65.3 | 7-10 | 66.8 ~ 73.0 | Aluminium | 247 | |||||||||||
| 71.7 | 7-11 | 73.0 ~ 79.5 | |||||||||||||
| 78.0 | 7-12 | 79.5 ~ 85.8 | Aluminium | ||||||||||||
| 84.4 | 7-13 | 85.8 ~ 92.0 | |||||||||||||
| 90.7 | 7-14 | 92.0 ~ 98.5 | |||||||||||||