Scroll Top

Split Nut

Split nuts when installed split into 4 legs leaving a wide clamp-up tail formation and an insert thread. Split Nuts are designed for use in soft materials, plastics, and composites as these provide extra blind side bearing area when used.

Split Nuts come with various advantages

  • Ideal for use in soft materials, composites, and high-density plastics.
  • Provides wide grip range with maximum torque
  • Reduction of bending stress at the thread root

The split insert nuts are available in Steel Grades, zinc plated trivalent passivated. These are used in variable grip ranges ranging from grip range 0.5 mm to 12.0 mm. The sizes are as below:

  • M4 Split Nut
  • M5 Split Nut
  • M6 Split Nut
  • M8 Split Nut
  •  M10 Split Nut

Split Nut

Split Nut

Split Nut

Split Nut

Split Nuts

Round Body, Flat Head – Steel – Split Nut

Material : Steel

Finish : Zinc Plated clear trivalent passivated

Rohs-logo
                                Split NutMetric / 6H
Round Body, Flat Head – Steel – Split Nut
Thread SizeGrip RangeHole SizeBody DiaBody LengthHead DiameterHead HeightPart Number
 (min ~ max) (+0.12/- 0.00)A (max)M (+/- 0.38)B (min ~ max)D (+/- 0.13) 
M4 X 0.70.50 ~ 3.806.136.1216.9210.84 ~ 11.340.90M4-R-FH-S-SN
M5 X 0.80.50 ~ 4.457.487.4721.0312.45 ~ 12.950.96M5-R-FH-S-SN
M6 x 1.00.50 ~ 7.108.808.7925.4015.50 ~ 16.381.50M6-R-FH-S-SN
M8 X 1.250.50 ~ 7.1011.1111.1028.9518.80 ~ 19.561.57M8-R-FH-S-SN
                                  Split NutMetric / 6H
Round Body, Flat Head – Long – Steel – Split Nut
Thread SizeGrip RangeHole SizeBody DiaBody LengthHead DiameterHead HeightPart Number
 (min ~ max) (+0.12/- 0.00)A (max)M (+/- 0.38)B (min ~ max)D (+/- 0.13) 
M4 X 0.73.80 ~ 6.856.136.1220.0710.84 ~ 11.340.90M4-R-FH-L-S-SN
M5 X 0.84.45 ~ 8.107.487.4723.8012.45 ~ 12.950.96M5-R-FH-L-S-SN
M6 x 1.07.10 ~ 12.708.808.7931.3215.50 ~ 16.381.50M6-R-FH-L-S-SN
M8 X 1.257.10 ~ 12.7011.1111.1034.9018.80 ~ 19.561.57M8-R-FH-L-S-SN